AEG Appliance Repair in Westgate

What does error code E90, E91, E92, E93 or E94 mean on an AEG washing machine?

Error codes E90 to E94 on an AEG washing machine indicate a configuration or electronics communication error. Switch off at the mains for 30 seconds then switch back on. If the error persists, contact a qualified technician as the electronic control board may require professional diagnosis.

What does error code i10, i11, AL5 or C1 mean on an AEG dishwasher?

Error codes i10, i11, AL5 or C1 on an AEG dishwasher indicate a water inlet problem - the dishwasher is not receiving water. Switch off the appliance before any inspection. Check the water tap is fully open, inspect the inlet hose for kinks, and clean the filter. If the problem persists, contact a qualified technician.

What does an F-prefix error code mean on an AEG oven?

F-prefix error codes on an AEG oven (such as F113, F908) indicate various internal faults requiring professional diagnosis. Switch off at the mains for 30 seconds then switch back on. If the error persists, note the specific code and contact a qualified technician.

What does error code i30 mean on an AEG dishwasher?

Error code i30 on an AEG dishwasher indicates water has been detected in the base of the appliance. Do not stand in any pooled water near the appliance. If safe to do so, switch off at the mains and turn off the water supply - only unplug if you can do so without risk of water contact. Leave overnight to allow any foam to disperse. Check for visible leaks around the door seal. If the problem persists, contact a qualified technician.

What does error code i50 mean on an AEG dishwasher?

Error code i50 on an AEG dishwasher indicates a wash motor or pump malfunction. Switch off at the mains for 5 minutes then switch back on and test. If the error persists, contact a qualified technician.

What temperature should I set my AEG wine cooler to?

For cellaring wines long-term, maintain a temperature between 12-14°C. For serving, white wines and sparkling wines are best at 6-12°C, while red wines are optimal at 14-20°C.

When should I clean or replace the carbon filter on my AEG cooker hood?

For hoods in recirculation mode, clean or replace carbon filters after approximately 160 hours of usage, or every 4-6 months. When the hood displays the letter 'C', it's time for maintenance.

What does the 'F' message mean on my AEG induction hob display?

The letter 'F' on an induction hob indicates a connection fault with the power supply. Switch off the hob and do not attempt to use it. The appliance will need to be inspected and repaired by a qualified electrician before use.

Where can I find the model and serial number on my AEG appliance?

The rating plate with model (PNC) and serial number is typically located: on washing machines and dryers, inside the door frame; on dishwashers, inside the door edge; on fridges and freezers, inside on the left wall; on ovens, behind the door on the frame; on hobs, on the underside. You will need these numbers when ordering spare parts or booking repairs.

Why is my AEG fridge making unusual noises?

Some noise is normal during operation. Humming indicates the compressor running, clicking sounds occur when the thermostat switches on and off, and gurgling is refrigerant flowing through the system. Ensure the fridge is level and not touching walls or cabinets. If rattling persists, check that items inside are not vibrating against shelves.