AEG Appliance Repair in Grange

What does error code F1 mean on an AEG oven?

Error code F1 on an AEG oven indicates a door closure problem, often related to the pyrolytic function. Check the door is intact, properly secured and fully closed. If the door was recently removed for cleaning, ensure it has been refitted correctly. If the problem persists, contact a qualified technician.

What does error code E4 mean on an AEG hob?

Error codes E4 or E4xx on an AEG hob indicate the overheating protection has activated. Switch off the hob immediately. Do not touch the cooking surface - allow it to cool completely until the residual heat indicator is off before handling any cookware. Ensure your cookware is induction-compatible with a flat base. If the error persists after cooling, contact a qualified technician.

What does error code C1 mean on an AEG oven?

Error code C1 on an AEG oven indicates the telescopic shelf supports have not been removed before running pyrolytic cleaning. Remove all telescopic rails, shelves and removable side rails from the oven before running the pyrolytic function.

What does error code iF0 or iF1 mean on an AEG dishwasher?

Error codes iF0 or iF1 on an AEG dishwasher indicate a water level problem. Switch off the appliance before any inspection. Check the filter and sump for foam, suds and debris, and clean all filters thoroughly. If the problem persists, contact a qualified technician.

What does error code C2 mean on an AEG oven?

Error code C2 on an AEG oven indicates the food temperature probe is still connected while attempting pyrolytic cleaning. Disconnect the food sensor from its user-accessible socket (located at the top right inside the oven cavity) before running the pyrolytic function.

How can I save energy with my AEG dishwasher?

Use the ECO programme for your dishwashing cycles. It takes longer but uses less energy because the dishwasher doesn't have to work as hard to achieve the same results.

Why should I use salt in my AEG dishwasher?

Your AEG dishwasher uses salt to soften the water, which ensures optimal cleaning results. Hard water minerals can leave deposits on dishes and reduce cleaning effectiveness.

How do I use the pyrolytic cleaning function on my AEG oven?

Remove all accessories and removable shelf supports, and wipe away any excessive food residue first to prevent smoke. Ensure the door is fully closed, then select the pyrolytic cleaning programme. Choose P1 for light cleaning or P2 for stubborn dirt. Programme durations vary by model - typically P1 runs for 1 to 1.5 hours and P2 for 1.5 to 3 hours. Consult your user manual for exact timings. Ensure good ventilation in the kitchen during the cycle. The oven heats to approximately 500°C - do not touch the oven exterior as surfaces become extremely hot. The door locks automatically for safety and will not open until the cycle completes and the oven has cooled. Once cool, simply wipe away the ash residue.

How much detergent should I use in my AEG washing machine?

Follow the detergent manufacturer's guidelines based on your load size and water hardness. If your machine has AutoDose technology, it automatically dispenses the correct amount of liquid detergent and softener for up to 20 washes.

Why won't my AEG dishwasher start even though the power is on?

The dishwasher will only start when the door is detected to be fully closed. Open and close the door again, listening for an audible click which indicates the door is properly closed.