AEG Appliance Repair in Quedgeley Fieldcourt

What does error code EH0 mean on an AEG washing machine?

Error code EH0 (and EH1, EH2, EH3) on an AEG washing machine indicates a power supply issue - the voltage may be too low, too high, or unstable. Unplug the appliance. Test the socket with another appliance and check your home's electrical supply is stable. Do not use extension cables. If the problem persists, contact a qualified electrician to inspect your electrical installation.

What does error code E10, E11 or C1 mean on an AEG washing machine?

Error codes E10, E11 or C1 on an AEG washing machine indicate a water inlet problem - the machine is not taking in water or has not taken in enough water. Switch off the appliance and unplug it from the mains before any inspection. Check that the water tap is fully open, inspect the inlet hose for kinks or blockages, and clean the inlet hose filter. If the problem persists, contact a qualified technician.

What does error code EF0 or EF3 mean on an AEG washing machine?

Error codes EF0 or EF3 on an AEG washing machine indicate the Aqua Control safety system has activated due to water leakage detection. This can be caused by actual leaks, excessive foam, or an unbalanced load. Switch off the appliance, unplug it from the mains, and turn off the water supply. Allow the appliance to stand for a few hours until any foam subsides. Reduce detergent usage, clean the dispenser drawer and pump filter, and check for leaks. If the problem persists, contact a qualified technician.

What does error code E70 mean on an AEG tumble dryer?

Error code E70 on an AEG tumble dryer indicates a temperature sensor fault. WARNING: This is a safety-critical issue. Do not use or attempt to restart the dryer until the problem has been professionally diagnosed. Unplug the appliance immediately and contact a qualified technician.

What does error code E10 mean on an AEG fridge freezer?

Error code E10 on an AEG fridge freezer indicates the fridge compartment is not cold enough, often after a power failure or placing warm food inside. Set the fridge to a colder temperature or activate Super Cool, and keep doors closed. The error should clear once the correct temperature is reached. If it persists, contact a qualified technician.

What is the AirDry function on my AEG dishwasher?

The AirDry function automatically opens the dishwasher door slightly at the end of the drying phase. This allows fresh air to circulate, improving drying results naturally without additional energy consumption. The door opens just a few centimetres and is safe in standard kitchen installations. This function can be disabled in settings if not suitable for your kitchen layout.

How do I clean the inside of my AEG tumble dryer drum?

Clean the inside of your tumble dryer every two to three months. Allow the dryer to cool completely if it has been used recently. Unplug the dryer, open the door, and clean the drum and drum lifters with a damp towel and neutral soap.

What cookware can I use in my AEG steam oven?

Use perforated steam trays provided with the oven for best steam circulation. Solid oven-proof dishes can be used for foods that need to sit in liquid. Avoid using plastic containers unless specifically rated for steam oven use. Glass and ceramic dishes are suitable for most steam cooking.

Can I wash and dry in one continuous cycle on my AEG washer dryer?

Yes, most AEG washer dryers offer a Non-Stop programme that automatically transitions from washing to drying. However, for best results with full loads, it's recommended to wash first, remove some items to match the drying capacity, then run the drying cycle separately.

What cookware is suitable for AEG induction hobs?

Use cookware made from cast iron, steel, enamelled steel, stainless steel, or multi-layer bases with the induction symbol. Materials that won't work include aluminium, copper, brass, glass, ceramic, and porcelain.