AEG Appliance Repair in Kingsholm and Wotton

What does error code E90, E91, E92, E93 or E94 mean on an AEG washing machine?

Error codes E90 to E94 on an AEG washing machine indicate a configuration or electronics communication error. Switch off at the mains for 30 seconds then switch back on. If the error persists, contact a qualified technician as the electronic control board may require professional diagnosis.

What does error code CE or CF mean on an AEG tumble dryer?

Error codes CE or CF on an AEG tumble dryer indicate an electronics problem with the control board. Do not use the appliance until the problem is resolved. Unplug the dryer and contact a qualified technician to arrange a repair visit.

What does error code E50 mean on an AEG tumble dryer?

Error code E50 on an AEG tumble dryer indicates a motor or software problem. Unplug the dryer for 30 seconds, then plug it back in and select a programme. If the error reappears, contact a qualified technician.

What does error code i30 mean on an AEG dishwasher?

Error code i30 on an AEG dishwasher indicates water has been detected in the base of the appliance. Do not stand in any pooled water near the appliance. If safe to do so, switch off at the mains and turn off the water supply - only unplug if you can do so without risk of water contact. Leave overnight to allow any foam to disperse. Check for visible leaks around the door seal. If the problem persists, contact a qualified technician.

What does error code i20, C2, F2 or AL6 mean on an AEG dishwasher?

Error codes i20, C2, F2 or AL6 on an AEG dishwasher indicate a drainage problem. Switch off the appliance before any inspection. Check the sink drain is not clogged, clean the interior filters and sump, and ensure the drain hose is not kinked or blocked. If the problem persists, contact a qualified technician.

How do I clean the drain pump filter on my AEG washing machine?

Clean the drain pump filter every two months or when error code E20 appears on the display. Ensure any wash cycle has fully completed, then switch off and unplug the machine. Place towels and a shallow container beneath the filter area to catch residual water. Locate the filter at the bottom right of the front panel, remove the cover and filter, then rinse under running water and remove any lint or objects from the recess.

How do I clean the exterior of my AEG oven?

Allow the oven to cool completely before cleaning exterior surfaces. Clean aluminium surfaces with a regular soap and water solution. For stainless steel, use a specialised stainless steel cleaner.

How do I adjust the humidity in my AEG fridge's crisper drawers?

Most AEG fridges have humidity control sliders on the crisper drawers. For leafy vegetables and herbs, use the high humidity setting to retain moisture. For fruits and vegetables that produce ethylene gas, use the low humidity setting to allow air circulation and prevent premature ripening.

What should I do before using my AEG dishwasher for the first time?

Set up the water softener according to your local water hardness, add dishwasher salt to the salt container (pour 1 litre of water into the container before adding salt for the first time), and fill the rinse aid dispenser.

Why is food freezing in my AEG fridge?

Check if Shopping Mode (also called Coolmatic, Frostmatic, FastCool or Fast/Freeze depending on your model) is switched on. This mode temporarily lowers the temperature and should be switched off after use.