AEG Appliance Repair in Abbeydale

What does error code E08 mean on an AEG fridge freezer?

Error code E08 on an AEG fridge freezer indicates a low voltage warning - the power supply has dropped below 170V. This is a protective warning to prevent compressor damage. Check your home's electrical supply is stable. If the warning persists, contact a qualified electrician.

What does error code C2 mean on an AEG oven?

Error code C2 on an AEG oven indicates the food temperature probe is still connected while attempting pyrolytic cleaning. Disconnect the food sensor from its user-accessible socket (located at the top right inside the oven cavity) before running the pyrolytic function.

What does error code E10, E11 or C1 mean on an AEG washing machine?

Error codes E10, E11 or C1 on an AEG washing machine indicate a water inlet problem - the machine is not taking in water or has not taken in enough water. Switch off the appliance and unplug it from the mains before any inspection. Check that the water tap is fully open, inspect the inlet hose for kinks or blockages, and clean the inlet hose filter. If the problem persists, contact a qualified technician.

What does error code E60 mean on an AEG tumble dryer?

Error code E60 on an AEG tumble dryer indicates a heating problem - the dryer is not heating correctly. Switch off the appliance and allow it to cool for at least 30 minutes before any inspection. Ensure the dryer has adequate ventilation, clean the fluff filter and condenser unit. If the problem persists after these checks, contact a qualified technician.

What does error code E30 or C3 mean on an AEG washing machine?

Error codes E30 or C3 on an AEG washing machine indicate water has been detected where it should not be, typically due to a leak or pressure sensor issue. Switch off the appliance, unplug it from the mains, and turn off the water supply before any inspection. Check the water inlet hose connections at both the tap and machine, and inspect the door seal for damage. Do not use the appliance until the source of the problem is identified. If the leak source is not visible, contact a qualified technician.

How often should I descale my AEG washing machine?

Occasionally run a cycle with a washing machine descaling product in an empty drum to prevent limescale build-up, even if your detergent contains water-softening agents. Treat your machine with a deep clean twice a year.

Why does my AEG washing machine smell bad and how can I fix it?

Bad smells are typically caused by a dirty drain filter, detergent build-up, or repeatedly using low temperatures and short wash cycles. These conditions create humidity that leads to mildew growth in the drum and detergent drawer. To eliminate odours, clean the drain pump filter regularly and wipe the door seal to remove mould - see related FAQs for safe cleaning procedures.

How do I use the steam cleaning function on my AEG oven?

Completely cool down the oven first. Fill the water drawer with approximately 950ml of water and select the steam cleaning function. Standard steam cleaning takes about 30 minutes; Steam Cleaning Plus lasts 75 minutes. After the cycle completes, open the door carefully and keep face and hands away to avoid steam burns.

How do I clean the heat exchanger on my AEG washer dryer?

Switch off and unplug the machine before cleaning. Locate the heat exchanger access panel at the front bottom of the machine. Open the cover, remove any visible lint or debris, and use a vacuum cleaner with a brush attachment to clean the fins. Clean at least once a month for optimal drying performance.

What is the AirDry function on my AEG dishwasher?

The AirDry function automatically opens the dishwasher door slightly at the end of the drying phase. This allows fresh air to circulate, improving drying results naturally without additional energy consumption. The door opens just a few centimetres and is safe in standard kitchen installations. This function can be disabled in settings if not suitable for your kitchen layout.