Beko Appliance Repair in Westgate

What does error code Er 11 mean on a Beko tumble dryer?

Error code Er 11 on a Beko tumble dryer indicates the compressor temperature sensor has exceeded its operational limits multiple times within a single cycle. Allow the dryer to cool for at least 30 minutes. Ensure adequate ventilation around the appliance. If the error continues, contact a qualified technician.

What does error code H3 mean on a Beko dishwasher?

Error code H3 on a Beko dishwasher indicates a diverter valve error. Switch off the dishwasher and unplug it from the mains. The valve that controls water flow to the spray arms is not operating correctly. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E8 mean on a Beko fridge freezer?

Error code E8 on a Beko fridge freezer indicates an ice maker sensor failure. Switch off the appliance and unplug it from the mains. On models with an ice maker, the temperature sensor for the ice maker is not functioning correctly. The ice maker may stop producing ice. Contact a qualified technician as this fault requires professional diagnosis.

What does error code Er 04 mean on a Beko tumble dryer?

Error code Er 04 on a Beko tumble dryer indicates the door temperature sensor has exceeded 60°C. Allow the dryer to cool down for at least 30 minutes before restarting. Ensure the room has adequate ventilation. If the error recurs frequently, contact a qualified technician for professional diagnosis.

What does error code E1 mean on a Beko washing machine?

Error code E1 on a Beko washing machine indicates a thermistor (NTC temperature sensor) fault. Switch off the machine and unplug it from the mains. Wait a few minutes, then restart. If the error persists, contact a qualified technician as this fault requires professional diagnosis.

How often should I replace the charcoal filter on my Beko cooker hood?

Non-washable charcoal filters should be replaced at least every four months. Washable activated charcoal filters can be cleaned every two months in hot water or dishwasher at 65°C, then dried in an oven at 100°C for 10 minutes. Replace washable filters every three years or if the mattress becomes damaged.

What temperature should my Beko fridge be set to?

Set your fridge to between 3°C and 5°C to slow bacterial growth and preserve perishable items effectively. In the UK, it's generally advised to keep your fridge at 5°C or below, though aiming for 4°C offers an extra layer of food safety.

How do I clean the condenser on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. Allow the appliance to cool completely before cleaning. The condenser is located at the bottom left of the appliance. Remove it, then clean by applying pressurised water with a shower head or under a tap until the water runs clear and drains freely. Reinstall and secure the two locks, ensuring the red clips are turned to the lock position.

How do I remove bad smells from my Beko washing machine?

Run an empty hot wash cycle at 90°C to kill bacteria and remove odour-causing residue. Clean the detergent drawer, door seal, and pump filter regularly. Leave the door slightly open after each wash to allow air circulation and prevent mould growth. Descale monthly in hard water areas.

Why is my Beko dishwasher not cleaning properly?

Check the filter is clean, as a blocked filter significantly reduces cleaning efficiency. Also check the spray arms for blockages and ensure you have selected a wash cycle with a suitable temperature. Water below 65°C cannot effectively remove germs or dissolve food residue.