Beko Appliance Repair in Matson, Robinswood and White City

What does error code Er 01 mean on a Beko tumble dryer?

Error code Er 01 on a Beko tumble dryer indicates the door was opened during the cycle. Close the door securely and do not open it until the programme has finished. Restart the cycle if needed.

What does error code Er 08 mean on a Beko tumble dryer?

Error code Er 08 on a Beko tumble dryer indicates the drying programme has exceeded the maximum permitted time (typically 300 minutes). The dryer has stopped as a safety precaution. Check that the lint filter is clean and the condenser unit is not blocked. Ensure adequate ventilation around the dryer. If the problem persists, contact a qualified technician.

What does error code E03 mean on a Beko dishwasher?

Error code E03 on a Beko dishwasher indicates a water heating temperature anomaly. Switch off the dishwasher and unplug it from the mains. The dishwasher is unable to reach or maintain the correct water temperature. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E6 mean on a Beko washing machine?

Error code E6 on a Beko washing machine indicates a motor problem. The machine may shake excessively or fail to spin during the cycle. Switch off and unplug the machine. Contact a qualified technician as motor faults require professional diagnosis and repair.

What does error code F9 mean on a Beko oven?

Error code F9 on a Beko oven indicates a door lock or switch malfunction. Switch off the oven and unplug it from the mains. The oven cannot confirm the door status. Ensure the door is properly closed and latched. Check for any obstructions. Do not attempt to force the door if it is locked. If the problem persists, contact a qualified technician.

How do I clean the evaporator on my Beko heat pump tumble dryer?

Use a soft-bristled brush to gently clean the fins of the evaporator by brushing upwards and downwards. You can also use a vacuum cleaner in the same up and down motions, provided it is dry. Wear protective gloves if cleaning by hand.

How do I set the water hardness level on my Beko dishwasher?

For first-time use, add 1 litre of water to the salt reservoir, stir with a spoon, then adjust the water hardness level according to your instruction manual. The water hardness setting ensures the correct amount of salt is used.

How do I clean the spray arms on my Beko dishwasher?

Remove the upper and lower spray arms, then clean them under running water. Ensure the holes are not clogged. Use only soft tools to clear blockages; avoid sharp objects like knives which could damage the spray arms.

Why is my Beko dishwasher not cleaning properly?

Check the filter is clean, as a blocked filter significantly reduces cleaning efficiency. Also check the spray arms for blockages and ensure you have selected a wash cycle with a suitable temperature. Water below 65°C cannot effectively remove germs or dissolve food residue.

How do I use the pyrolytic self-cleaning function on my Beko oven?

First remove all oven accessories such as trays and side racks. Clean the control panel and any removable parts manually. Then start the pyrolytic programme following your manual's instructions. Once complete and cooled, wipe away the ash residue with a damp cloth and water and vinegar solution.