Beko Appliance Repair in Abbeydale

What does error code H4 mean on a Beko dishwasher?

Error code H4 on a Beko dishwasher indicates a temperature sensor (NTC) error. Switch off the dishwasher and unplug it from the mains. The dishwasher cannot accurately measure water temperature. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E1 mean on a Beko washing machine?

Error code E1 on a Beko washing machine indicates a thermistor (NTC temperature sensor) fault. Switch off the machine and unplug it from the mains. Wait a few minutes, then restart. If the error persists, contact a qualified technician as this fault requires professional diagnosis.

What does error code E6 mean on a Beko washing machine?

Error code E6 on a Beko washing machine indicates a motor problem. The machine may shake excessively or fail to spin during the cycle. Switch off and unplug the machine. Contact a qualified technician as motor faults require professional diagnosis and repair.

What does error code Er 04 mean on a Beko tumble dryer?

Error code Er 04 on a Beko tumble dryer indicates the door temperature sensor has exceeded 60°C. Allow the dryer to cool down for at least 30 minutes before restarting. Ensure the room has adequate ventilation. If the error recurs frequently, contact a qualified technician for professional diagnosis.

What does error code Er 10 mean on a Beko tumble dryer?

Error code Er 10 on a Beko tumble dryer indicates the mains voltage is too high (above 265 volts). Unplug the dryer immediately. Have an electrician check your mains supply. Do not use the dryer until the voltage issue is resolved.

Why is there water leaking from my Beko fridge freezer?

Water pooling inside or beneath your fridge freezer usually indicates a blocked drain hole. The drain hole is located at the back of the fridge compartment. Switch off and unplug the appliance, then carefully clear the blockage using a cotton bud or the cleaning tool provided. A blocked drain prevents condensation from draining properly to the evaporation tray.

What is the SimplySteam function on my Beko oven?

SimplySteam uses steam to soften burnt-on food and grease inside your oven without harsh chemicals. Set your oven to cleaning mode at 200°C for 25 minutes, then wipe the inner surfaces with a damp sponge or cloth using warm water and washing up liquid.

What should I do if my Beko washing machine won't start?

Press and hold the start/pause/cancel button for three seconds. If this doesn't work, check the power supply by testing the socket with another appliance, ensure the door is properly closed, and check whether the delay function or child lock is activated.

How do I clean the evaporator on my Beko heat pump tumble dryer?

Use a soft-bristled brush to gently clean the fins of the evaporator by brushing upwards and downwards. You can also use a vacuum cleaner in the same up and down motions, provided it is dry. Wear protective gloves if cleaning by hand.

Why is my Beko washing machine not draining?

The most common cause is a blocked drain pump filter or a kinked drain hose. Check and clean the pump filter, and ensure the drain hose is not bent, twisted, or clogged.