Teka Appliance Repair in Westgate

What does the E4 error mean on a Teka refrigerator?

The E4 error on Teka refrigerators indicates a defrost temperature probe failure. The probe monitors the evaporator temperature during defrost cycles. Contact a specialist technician as this sensor requires professional testing and likely replacement. This fault may cause excessive frost build-up if not addressed.

What does the C81 error mean on a Teka induction hob?

The C81 error on Teka induction hobs indicates excessive temperature in the electronics or on the glass surface. The hob will switch off automatically as a safety measure. Allow the hob to cool down completely before attempting to use it again. Ensure adequate ventilation around and underneath the hob. If the error recurs frequently, contact a specialist technician to check the installation.

What does the C82 error mean on a Teka induction hob?

The C82 error on Teka induction hobs indicates excessive temperature on the glass surface, typically caused by an empty pot or pan being heated. The hob will switch off automatically. Remove the pot or pan from the cooking zone and allow the glass to cool down completely. Never heat empty cookware on an induction hob. If the error persists after cooling, contact a specialist technician.

What does the E3 error mean on a Teka refrigerator?

The E3 error on Teka refrigerators indicates a problem with the refrigerator compartment temperature sensor. This sensor monitors the temperature in the main fridge section. Contact a specialist technician as the sensor may need inspection and replacement. Temperature regulation in the refrigerator section may be affected until repaired.

What does the F symbol mean on a Teka induction hob?

The F symbol on Teka induction hobs indicates that a cooking zone is activated but no suitable pot or pan has been detected. Place an induction-compatible pot or pan centrally on the cooking zone. The cookware must have a magnetic base and be the correct size for the zone. If the symbol persists with suitable cookware in place, contact a specialist technician as there may be a fault with the pan detection system.

Why does my Teka gas hob flame go out at the minimum setting?

If the flame goes out at the minimum setting, the flame height may not have been adjusted correctly during installation. This adjustment is part of the installation process and involves setting the gas flow for each burner according to your gas pressure. When the flame height is not set correctly, the flame failure safety device will not detect the flame and will cut off the gas as a safety precaution. Contact a qualified gas engineer to adjust the flame heights.

Why is my Teka washing machine vibrating excessively?

Excessive vibration is often caused by the machine not being level. Adjust the feet to ensure the machine is perfectly level. The problem can also be caused by overloading the drum.

Why won't my Teka gas hob burner stay lit?

If the burner ignites but won't stay lit, the thermocouple may be dirty or misaligned. Clean the area around the ignitor and flame failure device with a small brush and ensure they are dry. Check that the burner caps are correctly positioned. If the problem persists after cleaning, the thermocouple may need to be inspected by a specialist technician.

How do I clean the metal filters on my Teka cooker hood?

Release the anchoring points to withdraw the filters. Clean them by soaking in hot water with neutral detergent until the fat dissolves, then rinse under the tap. Alternatively, they can be washed in a dishwasher.

Why is my Teka microwave beeping but not starting?

The child lock feature may be activated. To deactivate it, press and hold the corresponding button for 3 seconds until you hear a long beep indicating the lock has been released.