Teka Appliance Repair in Matson, Robinswood and White City

What does the E2 error mean on a Teka induction hob?

The E2 error on Teka induction hobs indicates that the electronic unit controlling the hob has become too hot. Switch off the hob and allow it to cool down. Check that the hob installation allows for adequate ventilation underneath and ensure the cooling fan vents are not blocked. If the error recurs frequently, contact a specialist technician to review the installation.

What does the Err7 error mean on a Teka washing machine?

The Err7 error on Teka washing machines indicates a secondary motor fault. Contact a specialist technician as the motor or motor control board may need inspection or replacement.

What does the ED error mean on a Teka dishwasher?

The ED error on Teka dishwashers indicates a communication failure between the main circuit board and the display panel. Switch off the dishwasher and unplug it from the mains. Wait a few minutes before reconnecting. If the error persists, contact a specialist technician as internal wiring or circuit boards may need inspection or replacement.

What does the E3 error mean on a Teka dishwasher?

The E3 error on Teka dishwashers indicates a heating phase error where the appliance is not reaching the required temperature within the preset time. Restart the washing programme to see if the error clears. If it persists, contact a specialist technician as the heating element or sensor may need replacing.

What does the UNB error mean on a Teka washing machine?

The UNB error on Teka washing machines indicates an unbalanced load where the spin cycle has failed due to uneven distribution of laundry in the drum. Open the door and redistribute the laundry evenly around the drum. Reduce the load size if it is too large and restart the spin cycle. If the problem persists with balanced loads, contact a specialist technician.

How do I use the defrost function on my Teka microwave?

Press the defrost button and enter the weight of the food using the number keys. The microwave will automatically calculate the appropriate defrosting time based on the weight entered. The defrost power is preset and cannot be changed.

My Teka oven door is locked and won't open. How do I unlock it?

The oven door typically locks during pyrolytic cleaning and remains locked until the oven cools to a safe temperature. If the door stays locked after cooling, try disconnecting the oven from the power supply for 5-10 minutes, then reconnect it. The door may have locked due to accidental cancellation of the pyrolysis cycle before completion. If the problem persists, consult your user manual or contact a specialist technician.

How often should I clean the pump filter on my Teka washing machine?

Clean the pump filter every 2 months to maintain optimal performance. The filter is located behind a cover on the front lower right corner of the machine.

Why does my Teka oven burn my food?

In most cases, this happens because an excessive temperature has been selected for cooking. If the temperature setting is correct, the thermostat bulb may not be correctly positioned.

What does SHOW, SHO or DEMO mean on my Teka oven display?

When SHOW, SHO or DEMO appears on your oven display, it means the demonstration mode is activated. In this mode, the oven functions normally but does not heat up. To disable demo mode, disconnect the oven from the power supply for at least 10 seconds, then reconnect it. On some models, you may need to press and hold the + and - buttons for 10 seconds after reconnecting.