Subzero Wolf Appliance Repair in Westgate

What does PF error mean on Wolf dual fuel ranges?

Error code PF on Wolf Legacy Dual Fuel Ranges indicates the unit had a power failure or the oven temperature is too hot for the cooking mode selected. Turn the oven selector bezel to a cooking mode, then back to OFF to reset. Open the oven door to allow the cavity temperature to cool. If the error persists, turn the home circuit breaker off for 30 seconds, then back on again. If the error returns, contact a specialised service technician.

What does ERR 07 mean on Wolf dual fuel ranges?

Error code ERR 07 on Wolf Legacy Dual Fuel Ranges indicates SPI communication lost from the electronic control head to the control board. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code E01 with F5 mean on Wolf convection steam ovens?

Error code E01 with message F5 on Wolf Convection Steam Ovens indicates problems with the control board caused by moisture or electromagnetic interference. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code FG mean on Wolf cooker hoods?

Error code FG on Wolf cooker hoods is a filter cleaning reminder that appears after approximately 100 hours of operation. Remove and clean the aluminium mesh filters. Clean filters monthly, or more frequently if frying foods. After reinstalling the filters, hold the DELAY key until "FF" appears to reset the reminder.

What does error code 10 1 02 mean on Sub-Zero Classic refrigerators?

Error code 10 1 02 on Sub-Zero Classic Series refrigerators indicates the refrigerator cabinet thermistor is unstable, suggesting a sensor malfunction in the temperature monitoring system. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

Why is there water or ice under my Sub-Zero crisper drawer?

Food debris, standing water, or ice built up in the drain trough or drain tube along the back wall may cause this. The drain may be clogged. On some models, the drain trough and tube are only accessible by a qualified technician.

Can I use aluminium foil to line my Wolf oven floor?

No. Do not place any cookware on the oven floor, or use aluminium foil or other material to line the oven floor or side walls. Failure to adhere to this will permanently damage the porcelain interior.

Why does the burner flame not appear to change when I adjust the setting on my Wolf gas hob?

Wolf sealed burners change the amount of BTUs supplied to the burner. The flame size may not appear to change visually, or the change may be minimal. This is considered normal operation.

How do I clean the blue porcelain interior of my Wolf oven?

Allow the oven to cool completely before cleaning. Remove all oven racks and rack guides for easier access. Use a razor blade to lift baked-on foods from the oven cavity and window. Spray stubborn stains with a mild abrasive cleaner or degreaser and scrub with a non-scratch scouring pad. Do not allow foods high in sugar or acid to remain on the porcelain surface as they may cause permanent discolouration.

Why does it seem like the compressor runs continuously?

It may appear that the compressor runs continuously, but because there are two independent systems and compressors, the freezer compressor could run, followed immediately by the refrigerator compressor. This gives the illusion that one or the other is running continuously when in fact they are operating independently.