Subzero Wolf Appliance Repair in Matson, Robinswood and White City

What does error code E123 with F5 or F20 mean on Wolf convection steam ovens?

Error code E123 with message F5 or F20 on Wolf Convection Steam Ovens indicates a system fault requiring professional diagnosis. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code FC mean on Wolf cooker hoods?

Error code FC on Wolf cooker hoods indicates the recirculation filters need cleaning on recirculating V Series cooker hoods. Clean or replace the recirculation filters following the manufacturer's instructions. After reinstalling the filters, hold the DELAY key until "FF" appears on the display to reset the code.

What does error code E18 mean on Wolf CT electric hobs?

Error code E18 on Wolf CT electric hobs indicates the power board has experienced a failure. Turn the home circuit breaker off for 30 seconds, then back on again. If the error persists, contact a specialised service technician as the power board likely requires replacement.

What does error code 3 mean on Wolf CI induction hobs?

Error code 3 on Wolf CI induction hobs indicates water on the glass over the control area, cookware placed on the control area, or a continuous beep with lines on display. Clean the control area thoroughly and remove any objects. Turn the circuit breaker off for 30 seconds, then back on again. If the error persists, contact a specialised service technician.

What does ERR 0E mean on Wolf dual fuel ranges?

Error code ERR 0E on Wolf Legacy Dual Fuel Ranges indicates a power relay shorted, sensed as closed when it should be open. This may also indicate a failure of the element circuit or relay drive circuitry. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What are the recommended temperature settings for my Sub-Zero refrigerator?

For Sub-Zero units with an electronic control panel, the factory settings of 3°C in the refrigerator and -18°C in the freezer are ideal food storage temperatures. Classic and Designer products have a range of 1°C to 6°C in the refrigerator and -20°C to -15°C in the freezer.

How do I clean my Wolf induction hob?

Use specific cleaners designed for glass surfaces to clean the induction cooktop. Wipe down regularly to maintain efficiency and prevent residue buildup that can impact heating performance. Avoid abrasive cleaners which could scratch the glass surface.

Can Wolf gas ranges be converted between natural gas and LPG?

Yes, Wolf gas ranges can be converted between natural gas and LPG. This conversion must be performed by a qualified Gas Safe registered engineer using the appropriate conversion kit.

My Sub-Zero ice maker is not producing ice. What should I check?

First, verify the ice maker is turned on separately from the refrigerator. Press the ICE MAKER button on the control panel; a single or triple ice cube icon should appear on the display. Check that the freezer temperature is at or below -15°C. Clean the condenser if it has not been cleaned in the past 6-23 months. Ensure the water filter has been replaced within the last 6-12 months.

How long should I wait for my Sub-Zero temperatures to stabilise after adjusting settings?

Temperature changes are not immediate. Allow 24 hours for the unit to reach the new set temperature before making further adjustments.