LG Appliance Repair in Moreland

What does error Er IS mean on an LG fridge freezer?

Error Er IS on an LG fridge freezer indicates an ice maker sensor problem. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need inspection or replacement.

What does error LE mean on an LG washing machine?

Error LE on an LG washing machine indicates the motor is overloaded or locked. Close the water tap, unplug the machine, check if the drum is overloaded, and wait 30 minutes before restarting. If the error persists, contact a specialist technician.

What does OFF mean on an LG fridge freezer display?

OFF on an LG fridge freezer display indicates the appliance is in Demo Mode where cooling is disabled. Press and hold the designated button combination (typically Ice Plus and Refrigerator buttons, or Freezer and Refrigerator buttons) for 3-5 seconds to exit Demo Mode and resume normal cooling. Button combinations vary by model; consult your user manual if this does not work.

What does error IE mean on an LG washing machine?

Error IE on an LG washing machine indicates a water inlet problem. Check that the water tap is fully open, inspect the inlet hose for kinks, and clean the inlet filter screens. If the problem persists, contact a specialist technician.

What does error Er rS mean on an LG fridge freezer?

Error Er rS on an LG fridge freezer indicates the refrigerator temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

How do I clean the heat exchanger on my LG heat pump tumble dryer?

Switch off the dryer and unplug it from the mains before cleaning. Clean the heat exchanger every 25 drying cycles or at least once a month. Open the heat exchanger cover at the bottom of the door opening. Slide out the heat exchanger unit and use a vacuum cleaner or soft brush to remove dust and lint from the fins. Rinse gently if heavily soiled and allow to dry completely before reinserting. Some LG models feature an Auto Cleaning Condenser that automates this process.

How do I prevent odours in my LG washer dryer?

Leave the door and detergent drawer slightly open after each use to allow air circulation. Run the Tub Clean cycle monthly. Use the correct amount of detergent for your load size and water hardness. Wipe the door seal and glass regularly to remove moisture and residue.

How do I use Smart Diagnosis on my LG washing machine?

Smart Diagnosis allows you to identify issues using the LG ThinQ app on your smartphone. Connect your washing machine to your home Wi-Fi network and register it in the ThinQ app. When an issue occurs, open the app and follow the Smart Diagnosis prompts. The app will analyse your machine's performance and provide troubleshooting guidance or recommend professional service if needed.

How do I clean the inlet valve filters on my LG washing machine?

Switch off the washing machine and unplug it from the mains. Turn off the water supply taps and disconnect the inlet hoses from the back of the machine. Use pliers to carefully remove the small mesh filters from inside the inlet valve connections. Clean the filters under running water using a soft brush to remove any sediment or debris. Reinsert the filters, reconnect the hoses, and turn the water supply back on. Check for leaks before plugging in the machine.

What is the Tub Clean cycle and how often should I use it?

The Tub Clean cycle is a drum cleaning function that helps remove detergent residue, bacteria and odours from the washing machine drum. Run it once a month without any laundry in the machine. The cycle heats water to approximately 60°C to sanitise the drum. No detergent is required, though you may use a washing machine cleaner if desired.