LG Appliance Repair in Kingsholm and Wotton

What does error OE mean on an LG washing machine?

Error OE on an LG washing machine indicates a drainage problem. Clean the pump drain filter at the front bottom of the machine, check the drain hose for blockages, and ensure it is correctly installed. If the problem persists, contact a specialist technician.

What does error Er FF mean on an LG fridge freezer?

Error Er FF on an LG fridge freezer indicates the freezer fan is not functioning correctly. Unplug for 10 minutes, check for obstructions or ice buildup around the fan, and restart. If the error persists, contact a specialist technician.

What does error d80, d90 or d95 mean on an LG tumble dryer?

Error d80, d90 or d95 on an LG tumble dryer indicates exhaust airflow restriction (the number shows percentage blocked). Stop using the dryer immediately until the blockage is fully cleared, as blocked exhaust ducts are a fire hazard. Clean the lint filter, check the exhaust vent hose for lint buildup, and ensure the external vent is clear. If the error persists after clearing all visible blockages, contact a specialist technician.

What does error nP mean on an LG tumble dryer?

Error nP on an LG tumble dryer indicates no power is reaching the heating element. Unplug the dryer immediately. This error typically indicates an electrical wiring issue in your home. Contact a qualified electrician to check the electrical supply before attempting to use the dryer again.

What does error Er dS mean on an LG fridge freezer?

Error Er dS on an LG fridge freezer indicates the defrost temperature sensor has malfunctioned. Unplug the refrigerator for 10 minutes and reconnect. If the error persists, contact a specialist technician as the sensor may need replacement.

What is the recommended temperature setting for my LG fridge?

Set the refrigerator compartment between 1°C and 5°C, with 3°C being optimal for most foods. Set the freezer to -18°C for proper food preservation. Avoid setting temperatures too low, as this wastes energy without improving food safety. Allow 24 hours after installation or adjustment for temperatures to stabilise.

Is it normal for my LG refrigerator to make noise?

Some sounds are normal during operation. A humming or buzzing indicates the compressor running. Clicking sounds occur when the defrost cycle starts or stops. Gurgling or bubbling is refrigerant flowing through the system. Rattling may indicate items on top of the fridge or the appliance touching a wall. A new refrigerator may be louder for the first 8-12 hours as it reaches operating temperature. Contact a qualified technician if you hear grinding, knocking or unusually loud noises.

Why is my LG tumble dryer taking too long to dry clothes?

Extended drying times are usually caused by restricted airflow. Clean the lint filter before each cycle and check the heat exchanger or condenser for lint buildup. Ensure the exhaust vent hose is not kinked or blocked. Overloading the drum prevents proper air circulation; fill to approximately half capacity for best results. Check that Energy Saver mode is not enabled if faster drying is needed. In colder weather, drying times naturally increase as the dryer takes longer to warm up.

Can I use metal in my LG microwave?

Never use metal containers, aluminium foil or utensils with metal trim in a standard microwave, as this can cause arcing and damage the appliance. Some LG convection microwaves allow metal in convection mode only. Always check your user manual for guidance specific to your model.

How often should I clean the lint filter on my LG tumble dryer?

Clean the lint filter after every drying cycle. A blocked lint filter reduces drying efficiency, increases energy consumption and can pose a fire hazard. Remove the filter, peel away the lint by hand or use a soft brush, and replace it securely before the next use.