Whirlpool Appliance Repair in Matson, Robinswood and White City

What does the F07 error mean on a Whirlpool dishwasher?

The F07 error on a Whirlpool dishwasher indicates a water turbine fault. The turbine that measures water flow is damaged or not functioning correctly. Unplug the appliance from the mains before any inspection. Contact a qualified engineer as the water turbine may need replacing.

What does the F01 error mean on a Whirlpool washer dryer?

The F01 error on a Whirlpool washer dryer indicates an electronic circuit board fault. Unplug the appliance from the mains and allow it to cool for at least 30 minutes if it has been drying. Wait for a minimum of 2 minutes after unplugging, then reconnect and wait 30 seconds before trying again. If the fault remains, contact a qualified engineer.

What does the F13 error mean on a Whirlpool washer dryer?

The F13 error on a Whirlpool washer dryer indicates a dryer temperature sensing fault where the appliance won't dry clothes. Unplug the appliance from the mains and allow it to cool for at least 30 minutes. Contact a qualified engineer as the sensor may need replacing.

What does the F09 error mean on a Whirlpool dishwasher?

The F09 error on a Whirlpool dishwasher indicates a software error. The control system has detected a fault in its programming. Unplug the appliance from the mains and wait for 2 minutes. Reconnect and try again. If the fault remains, contact a qualified engineer.

What does the E0 error mean on a Whirlpool fridge freezer?

The E0 error on a Whirlpool fridge freezer indicates an ice maker fault on models with an ice maker fitted. Unplug the appliance from the mains before any inspection. Contact a qualified engineer to inspect the ice maker mechanism.

Why is there frost or ice build-up inside my Whirlpool fridge?

Ice build-up inside the fridge compartment is often caused by the door not sealing properly. Check the door seal for damage or debris and ensure the door closes fully. Avoid leaving the door open for extended periods. Check that food items are not blocking the air vents inside the fridge, as this disrupts temperature circulation.

What temperature should I set my Whirlpool freezer to?

The recommended freezer temperature is -18°C for safe long-term food storage. Some models can be set as low as -26°C for fast freezing fresh food. Check your user manual for the optimal settings for your specific model.

Why is my Whirlpool microwave not heating food?

If the microwave operates but does not heat, first check that Demo mode is not enabled and that the door closes properly. Ensure you are using microwave-safe containers. If the turntable is not rotating, check it is correctly positioned. If food still does not heat after these checks, contact a qualified technician.

Why are my dishes not clean after a Whirlpool dishwasher cycle?

Poor cleaning results can be caused by several factors: ensure items are loaded correctly without blocking the spray arms, use the correct amount of detergent, and check that the salt and rinse aid reservoirs are filled. Clean the filter regularly as a blocked filter reduces cleaning performance. For heavily soiled items, select a more intensive programme.

Why is my Whirlpool fridge making unusual noises?

Some operational sounds are normal, including gentle humming from the compressor and clicking when the thermostat cycles. Gurgling or bubbling sounds indicate refrigerant flowing through the system. However, loud rattling may indicate the fridge is not level or items on top are vibrating. If you hear grinding or squealing sounds, contact a qualified technician.