Remeha Appliance Repair in Abbeydale

What does the error E04.17 mean on a Remeha Quinta Ace boiler?

Error E04.17 on a Remeha Quinta Ace boiler indicates the driver for the gas valve is broken. This is an internal electronic fault. Do not attempt any repairs. Contact a commercial heating engineer to replace the electronic PCB.

What does the error E28 mean on a Remeha boiler?

Error E28 on a Remeha boiler indicates a flue thermistor fault. In cold weather, check for a frozen condensate pipe and thaw if necessary. If not frozen, contact a Gas Safe registered engineer to inspect the flue system and sensor.

What does the error E15 mean on a Remeha boiler?

Error E15 on a Remeha boiler indicates flame loss during operation. The flame was established but then lost. Contact a Gas Safe registered engineer to check ignition wiring, gas supply, and for recirculation of flue gases.

What does the error E[00 mean on a Remeha Quinta Pro boiler?

Error E[00 on a Remeha Quinta Pro boiler indicates a parameter was not found in the storage unit. Check wiring connections. If the error persists, the PSU may need replacement. Contact a commercial heating engineer experienced with Quinta Pro systems.

What does the error E11 mean on a Remeha boiler?

Error E11 on a Remeha boiler indicates the air box temperature is too high due to air leaking from the heat exchanger. Contact a Gas Safe registered engineer to check the viewing glass and heat exchanger front plate seals.

How can I improve the efficiency of my Remeha boiler?

Improve efficiency by scheduling annual servicing to keep the heat exchanger clean, ensuring the burner is correctly adjusted, maintaining proper water pressure between 1 and 1.5 bar, using programmable thermostats to create heating schedules, and ensuring your home is properly insulated to reduce heat loss.

How do I set my Remeha boiler for holiday or extended absence?

For extended absences, the iSense controller allows you to programme shutdown periods during which the heating system operates in frost protection mode only. Access this through the programme menu. If your home will be unoccupied for a long period with risk of frost, you may alternatively drain the boiler and central heating system completely. Consult a qualified engineer if you are unsure which option is appropriate.

What size Remeha Quinta Ace boiler do I need?

The Remeha Quinta Ace range is available in outputs from 30 kW to 160 kW. Correct sizing is essential to maximising performance and efficiency. An undersized boiler will struggle to meet demand, while an oversized boiler will short-cycle, reducing efficiency. A detailed heat loss calculation for your building is essential.

What are the installation requirements for a Remeha Quinta Ace?

The Remeha Quinta Ace must be installed in a frost-free area with minimum 1 metre by 1 metre clear space in front for standard maintenance. The condensate must be discharged via a tundish directly into a drain using synthetic materials rated for acidic condensate (pH 2 to 5) with minimum 30 mm per metre slope.

What should I do if my Remeha boiler condensate pipe is frozen?

If your boiler stops working during cold weather and displays error E4 or similar codes, the condensate pipe may be frozen. Locate the frozen section of the white plastic pipe running outside and thaw it with warm water using a hot water bottle, microwaveable heat pack, or watering can with warm water. Once thawed, reset the boiler.