Brandt Appliance Repair in Matson, Robinswood and White City

What does error E1 mean on a Brandt dishwasher?

Error E1 on a Brandt dishwasher indicates extended water inlet time where the machine takes longer than expected to fill. Ensure the water tap is fully open, check the inlet hose filter for debris, and verify water pressure is adequate.

What does error F10 mean on a Brandt oven?

Error F10 on a Brandt oven is an informational code indicating a power cut occurred during cooking. The oven has automatically stopped. Check your electrical supply and circuit breaker. If power has been restored, you may need to restart your cooking programme.

What does error F3 mean on a Brandt induction hob?

Error F3 on a Brandt induction hob indicates a short circuit in the ceramic plate temperature sensor for zone 1. Do not use the affected zone. Contact a specialised technician for sensor replacement.

What does error d08 mean on a Brandt washing machine?

Error d08 on a Brandt washing machine indicates a water distribution fault. This error indicates an internal fault with the water distribution mechanism and requires a specialised technician for diagnosis and repair.

What does error d02 mean on a Brandt washing machine?

Error d02 on a Brandt washing machine indicates a drainage fault where the machine cannot drain water properly. Switch off and unplug the appliance before cleaning the pump filter at the lower front of the machine. Check the drain hose for kinks or blockages, and verify the drain connection is not airtight.

How do I adjust the rinse aid setting on my Brandt dishwasher?

To open the dispenser, turn the cap to the open arrow (left) and lift it out. Pour in the rinse aid without overfilling. The recommended setting is 4. If spots or poor drying persist, increase the setting to 5 or higher until dishes are spot-free.

What do the detergent compartments on my Brandt washing machine mean?

Most Brandt washing machines have 3 compartments marked I, II, and a flower symbol. Compartment I is for pre-wash detergent, compartment II is for the main wash cycle, and the flower symbol compartment is for fabric softener.

How do I add salt to my Brandt dishwasher?

The salt container is located beneath the lower basket. Use the funnel supplied with your dishwasher and add approximately 1.5kg of dishwasher salt. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. If salt spills inside the dishwasher, run a short rinse cycle immediately to prevent corrosion.

What does the OK indicator mean on my Brandt fridge?

The OK indicator confirms that the temperature in the coldest area of your refrigerator is below 4°C, which is the safe temperature for food storage. If the OK indicator is not showing, check your temperature settings and avoid opening the door frequently. The indicator should appear within a few hours of adjusting the temperature.

What should I check if my Brandt dishwasher doesn't start?

First check whether the dishwasher is plugged in and that there are no problems with your home's electrical system. Then verify the door is closed properly, as most machines have a safety lock that prevents operation with an open door.