Baxi Appliance Repair in Westgate

What does the error E119 mean on a Baxi boiler?

Error E119 on a Baxi boiler can indicate low water pressure, a water pressure switch fault, or a frozen condensate pipe. Switch off the boiler first. Check the system pressure and repressurise if below 1 bar using the filling loop. In cold weather, check if the condensate pipe is frozen and thaw it using warm water. If pressure appears normal and the condensate pipe is clear, contact a Gas Safe registered engineer as the pressure switch may be faulty.

What does the error E.00.04 mean on a Baxi boiler?

Error E.00.04 on a Baxi boiler indicates the return temperature sensor is disconnected. Contact a Gas Safe registered engineer to check the sensor connection and wiring.

What does the error E.04.08 mean on a Baxi boiler?

Error E.04.08 on a Baxi boiler indicates the maximum safe temperature value has been reached. Switch off the boiler immediately and allow it to cool completely for at least 30 minutes before attempting a reset. Check for circulation issues such as closed valves or airlocks. Contact a heating engineer if the fault recurs.

What does the error E.04.13 mean on a Baxi boiler?

Error E.04.13 on a Baxi boiler indicates the fan impeller is blocked or has exceeded maximum speed. Do not access internal components. Contact a Gas Safe registered engineer to inspect and repair the fan assembly.

What does the error H.03.02 mean on a Baxi boiler?

Error H.03.02 on a Baxi boiler indicates a temporary flame loss. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. Allow the boiler time to recover automatically. If it happens frequently, contact a Gas Safe registered engineer to investigate the cause.

How does a Baxi air source heat pump work?

A Baxi air source heat pump takes heat from the outside air and boosts it to a higher temperature using a compressor, then transfers the heat to your home's heating system. It works like a refrigerator in reverse, with a fan drawing ambient air into the evaporator where refrigerant absorbs the heat.

What are the running costs of a Baxi air source heat pump?

When properly sized and installed, a Baxi air source heat pump typically costs the same as it currently does for gas and electric to heat a home, with the bill being entirely electric. In some circumstances the cost could even be reduced, depending on usage patterns.

How efficient are Baxi air source heat pumps?

Baxi air source heat pumps are generally 300 to 400% efficient. This is measured as Coefficient of Performance (COP), meaning the heat pump can create three to four units of energy for every one unit of electricity it uses.

Do I need a cylinder with a Baxi heat pump?

Yes, Baxi air source heat pumps require a hot water cylinder as they do not provide instant hot water like a combi boiler. The Baxi ASHP cylinders are designed specifically for use with heat pumps and feature larger coils for better heat transfer at lower flow temperatures.

What is the ideal pressure for a Baxi boiler?

The ideal pressure for a Baxi boiler is between 1 and 2 bar when the system is cold. A pressure reading in this range ensures the boiler operates efficiently and safely.